Argentina's Rosario Grain Exchange recently reported that wheat foam concrete,foaming agent,concrete curing agent are expected to continue to be influenced by international situations.
To study the problem of collapse mode cracking in the cast-in-place foam concrete wall, using ordinary Portland cement, fly ash, and self-made composite foaming agent as the primary raw materials, the admixtures (there are two kinds of admixtures) were studied through single-factor experiments. One is a foaming agent, and the other is concrete curing agent.
According to the characteristics of the foaming agent that the foam pore size can be adjusted freely, and the preparation is atomized and diluted during use. The pore size is more acceptable and uniform (the pore size is less than 1mm). The light foam and slurry are mixed to make a lightweight concrete microporous slurry. The porosity in the slurry accounts for 70% of the total volume of the foamed concrete. The foams in the slurry are closed by a water film. They are not connected, which improves the problem of high water absorption in traditional concrete and improves the frost resistance and impermeability of foam concrete. It has a specific activation effect on fly ash.
The slurry in the pouring and forming stage has self-leveling characteristics, good pore structure, smooth entry into the mold, and rapid thickening and forming. Ensure the stability of expansion and improve the strength of foam concrete blocks. Foamed concrete has excellent properties such as lightweight, heat preservation, heat insulation, sound insulation, etc., and it has low production investment. It can use a large amount of industrial waste residue. Its application is of great significance to building energy conservation and environmental protection, so it will gradually replace concrete construction.
According to previous studies, with the increase of fly ash content, the amount of cement decreases, and the early compressive strength of concrete drops significantly. However, fly ash has pozzolanic activity, and in an alkaline environment, with the increase of concrete age, the compressive strength of high-volume fly ash foam concrete will increase significantly. In addition, the large amount of fly ash dramatically reduces the number of harmful pores, improves the compactness of the slurry structure, and is beneficial to the later strength increase.
In recent years, the application of foamed concrete has developed rapidly, but there are still a series of problems in the cast-in-place foamed concrete insulation wall:
(1) Foam concrete has low strength and is not suitable as a load-bearing wall material;
(2) Prefabricated blocks increase the process and engineering costs;
(3) Dry shrinkage of foam concrete and cracking caused by dry-wet cycle and loose structure, due to the problems of collapsed form and easy carbonization due to the influence of pouring height, seriously restrict the broad application of foam concrete.
TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.
If you are looking for high quality foaming agent, please feel free to contact us and send an inquiry.
Researchers at the Centre for Translational Atomic Materials at Swinburne University of Technology, Melbourne, Australia have developed a new graphene film that absorbs more than 90% of sunlight while eliminating most of the infrared thermal emission losses, a highly efficient A solar-heated metamaterial capable of rapidly heating to 83 degrees Celsius (181 degrees Fahrenheit) in an open environment with minimal heat loss. Proposed applications for the film include thermal energy harvesting and storage, solar thermal power generation, and seawater desalination.
Our company provides graphene foam concrete,foaming agent,concrete curing agent, if you need to buy graphene and foam concrete,foaming agent,concrete curing agent, please feel free to contact us.
People need to know if graphite is toxic to humans and its potential effects on our health so that they can take immediate action if needed.…
all graphite materials obtained by organic carbonization and then graphitization at high temperature can be called artificial graphite, such as carbon fiber, pyrolytic carbon, foamed graphite, etc…
Accelerating agent is to point to the admixture that can make concrete condenses quickly after concrete hardening. Early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the lat…