News

  • 0
  • 0

The formula and production method of water reducer for concrete

OPEC+ is likely to stick to its plan for a small increase in oil water reducer,water reducing agent ,concrete admixtures will continue to be influenced by the oil supply shortage.


The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and also help save resources and protect the environment. , has gradually become an essential material for high-quality concrete. Among them, the water reducing agent is a kind of concrete, and the water reducing agent is a concrete admixture that can reduce the mixing water consumption under the condition that the concrete slump is basically unchanged. Most of them are anionic surfactants, such as lignosulfonate, naphthalene sulfonate formaldehyde polymer, etc. When we add the concrete mixture, it has a dispersing effect on the cement particles, which can improve its workability, reduce the unit water consumption, and improve the fluidity of the concrete mixture; or reduce the unit cement consumption, effectively saving cement.


The specific operation method of the water reducing agent formula for concrete:

1. Maleic anhydride is prepared into a 5-7% solution according to the required amount and recorded as the head material.

2. The initiator is prepared into a 5-10% solution for later use.

3. Add the required amount of APEG or TPEG, heat to liquefy it, and then add the headstock.

4. Nitrogen replacement;

5. When the temperature rises to 75-85°C, the initiator is added dropwise, and the dropwise addition is completed at 80°C for 1.5-2 hours.

6. After the dropwise addition of the initiator is completed, keep the temperature at 80-90° C. for 4-4.5 hours to complete the reaction and cool down.

7. When the temperature drops to 40-50℃, add 50% KOH solution to neutralize to PH: 7-8.

8. After measuring the solid content, add the measured soft water according to the required solid content.

9. After the solid content is determined to be qualified, discharge the material.


After the above experiments, we can get the basic formula of water reducer for concrete:

Concrete water reducer formula 1:

Hydroxyethyl acrylate: 25g, acrylamide: 5g, allyl polyoxyethylene ether: 175g, sodium persulfate: 10g, neutralized by sodium hydroxide.

Concrete water reducer formula 2:

Allyl polyoxyethylene glycol ether: 40 g, acrylic monomer: 30 g, 10% ammonium persulfate aqueous solution 40 g, neutralized with triethanolamine.

Concrete water reducer formula 3:

Allyl polyoxyethylene glycol ether: 100 g, methacrylic acid: 70 g, acrylic acid: 20 g, 10% aqueous ammonium persulfate solution: 50 g, neutralized with sodium hydroxide.

Concrete water reducer formula 4:

Methacrylic acid: 25g:, allyl polyoxyethylene ether: 175g, sodium persulfate: 10g. , neutralized with sodium hydroxide.

Concrete water reducer formula 5:

TPEG: 180 g, hydrogen peroxide: 0.63 g, thioglycolic acid: 0.56 g, ascorbic acid: 0.3 g, acrylic acid: 182.3 g, neutralized with sodium hydroxide.

Concrete water reducer formula 6:

APEG: 180 g, hydrogen peroxide: 10 g, thioglycolic acid: 2.07 g, itaconic acid: 10 g, methacrylic acid: 21.23 g, neutralized with sodium hydroxide.


The above is for reference only. If you need more, you can find a professional concrete water reducer formulation and component analysis and testing agency to provide concrete water reducer, concrete additive formula reduction, concrete polyacid water reducer component analysis, concrete water reducer Formula analysis, proportion of concrete water reducing agent, decryption of water reducing agent formula, composition analysis of concrete water reducing agent, composition test of concrete water reducing agent, identification of concrete water reducing agent raw materials, etc. Analyze the chemical name and approximate content ratio of each raw material in the sample, provide technical assistance for your production, and even develop the preparation method of the sample for you.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality concrete admixtures, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com



During the first 100 days of its special military operation in Ukraine, Russia earned 93 billion euros from fossil energy exports, most of it from the European Union, according to an independent research center.

The report by the Finland-based Center for Energy and Clean Air comes as Ukraine urges the West to cut off all trade with Russia to stop funding the Kremlin's war chest.

The European Union recently decided to impose a gradual embargo on Russian oil imports, with some exceptions, according to reports. Russian gas, on which it relies heavily, is currently unaffected.

In the first 100 days of the Conflict between Russia and Ukraine (February 24 to June 3), the EU accounted for 61 percent of fossil energy imports, or about 57 billion euros, according to the Energy and Clean Air Research Center.

Russia's revenue came first from crude oil sales (43.87 billion euros), followed by pipeline gas (22.89 billion euros), then petroleum water reducer,water reducing agent ,concrete admixtures, please feel free to contact us and send an inquiry.


Inquery us

Our Latest News

What is the scope of application of zinc stearate emulsion?

Water-based zinc stearate mainly uses zinc stearate special additives, sandpaper polishing paint, thermal paper sensitizer functional additives, rubber and water-based paint release agents, etc.…

Erbium oxide Er2O3 powder properties

Erbium oxide Er2O3 powder is a pink powder with the chemical formula Er2O3, mainly used as an additive for yttrium iron garnet and a control material for nuclear reactors.…

What is the applicable scope of FeSi2 iron disilicide powder?

Iron disilicide is an inorganic silicon compound with a molecular formula of FeSi2 and a molecular weight of 119.975. It is a gray powder, odorless, tetragonal crystals. For hydrogen catalytic oxidation and methanation catalyst.…